$269.00
Nashville Sets
Nashville set based on the 60’s Custom set.
- AVn-60b bridge
- Impersonator E69 or AVn-62 middle Strat
- AVn-60n Gen-2 Tele neck -or- Impersonator E69 Strat neck
Nashville set based on the Broadcaster set.
- AVn-48b bridge
- Impersonator E56 or AVn-59 middle Strat
- AVn-48n Gen-2 Tele neck -or- Impersonator E56 Strat neck
Share
Description
This page is for information only.
Begin your order by adding your Named Set -or- Tele bridge pickup to your Cart and then click ADD ANOTHER PRODUCT for the additional pickup(s).
Nashville set based on the 60’s Custom set.
- AVn-60b bridge
- Impersonator E69 or AVn-62 middle Strat
- AVn-60n Gen-2 Tele neck -or- Impersonator E69 Strat neck
Nashville set based on the Broadcaster set.
- AVn-48b bridge
- Impersonator E56 or AVn-59 middle Strat
- AVn-48n Gen-2 Tele neck -or- Impersonator E56 Strat neck
Nashville set based on the Impersonator 52b and two Strat pickups (Blackguard Tele sound)
- Impersonator 52b (Tele bridge)
- Impersonator 54 middle (Strat)
- AVn-52n Gen-2 -or- Impersonator E69 neck (Strat)
Nashville set based on the Twang Blaster and two Strat pickups (twang x 3).
- Twang Blaster bridge (Tele bridge)
- Impersonator E56 middle (Strat)
- AVn-60n Gen-2 -or- Impersonator E56 neck (Strat)
Nashville set based on the Bridge Blaster and two Strat pickups (balls to the wall bridge & lush twang x 2).
- Bridge Blaster (Tele bridge)
- Texas Jalapeno middle (Strat)
- Neck Blaster (Tele) -or- AVn-69 (Strat)
Nashville set based on the Kick-in-the-Arse and two Strat pickups (balls to the wall bridge & fatness x 2).
- Kick-in-the-Arse (Tele bridge)
- Kick-in-the-Arse or Big-Nine-O (Strats)
- Big-Nine-O or Impersonator MV (Strats)
Check out our Nashville TK7 & TK9 Goodbye Soldering Harness for 3 pickups.
Some people will call these noiseless Telecaster pickups but Kinman prefers to describe them correctly as Zero-Hum Telecaster pickups. That’s because there are 2 types of noise, Hum which is cancelled in the pickup and Buzz which can only be minimized by shielding the wiring cavities (refer to >Technical >Perfect Guitar >Shielding for newer guitars
| ** Alnico-K is a unique proprietary Alnico rod magnet developed by Kinman in 1985. It is Alnico-5 but has 40% less string pull than Alnico-5 so sustain is longer and there is much less clatter from string crash and no Strat-itis string warble.
* Fender and Telecaster and Tele are registered Trade Marks of Fender Musical Instrument Corp, Inc. Kinman is not associated with FMIC but they kindly permit us to refer to their Trade Marks to reference our products. |
Technical Stuff
Adjustment requirements
Please refer to >Technical >Adjust & Setup
Connection means available
- Bare wires for soldering.
- Kinman connectors for plugging into any Kinman Goodbye-Soldering Harness.
Pot & Capacitor values
- Plenty bright enough with a 250k volume pot. Might be too bright with less punch in Teles with 1Meg or 500k pots.
- Stock pots can actually measure as low as 175k. Pots in our Goodbye-Soldering Harness are guaranteed to measure no less that 250k.
- If you don’t include a Harness, for additional $25 we will include a 500k pot and parts and instructions for our Auto-Change device with your order for when the other pickups requires 250k.
- Normal tone cap value of 0.022uF in 63 ~ 100 volt Polyester. Smaller value reduces the severity of Treble cut, larger values increase it.
Magnet spread
- Bridge 55mm (Standard)
- Middle: choose Intermediate 51mm Strat magnet spread
- Neck Strat: choose Narrow 49.5mm Strat magnet spread
- Neck Tele: 50mm (Standard)
Hook-up cables
- Cut generously longer than necessary for Telecasters.
- Custom lengths by request with Order.
- Bridge pickups have 2 conductor shielded.
- Neck pickup has 3 conductor shielded cable (OK for series connection of 4 pos switch –and– phase reversible –and– compatible with Fender’s S1 harness).
Dimensions
- Click for Tele dimensions page and Strat dimensions page
Output Polarity:
- in-phase with Gibson and Copy humbuckers
- in-phase with all other Kinman pickups
- opposite phase to Fender
Mounting hardware included
- 7 Pan head mounting screws 6-32 UNC x for bridge and Strat middle & Neck
- 2 Pan head mounting screws 4-40 UNC x for Tele neck
- 5 Silicon Rubber tube springs.
Covers
- Tele bridge pickups don’t have covers, the top coil is bound with black (or white) twine and wax potted for protection.
- Strat covers are molded plastic, available in various colors.
- Tele Neck pickup has durable electro-Chrome plated molded plastic for zero impact on sonic performance
- With and without Kinman logo.
We highly recommend consulting the Install Guide in Tech Info even if you think you know it all. Kinmans’ require specialized knowledge and sometimes there is updated info. There is also a handy wiring diagram available.
We also highly recommend consulting the Adjust & Set-up page in Tech Info so you get the best out of your Kinman pickups.
