$179.00
Out of stock
Bass VI Jaguar
The Zero-Hum Blues-Jag (Impersonator MV aka modern vintage) is a great pickup for the Bass VI, it is dynamic and responsive, and it has a slightly bolder sound.
We think a Texas Jalapeno v3 makes a great companion bridge pickup because it has a higher output level that helps balance the loudness of the bridge and neck. It also has more piano-mid-tones and slightly less treble that agrees with bass. Its sound is open and full of tone, and we believe you’ll love the experience.
Out of stock
Share
Description
Bass VI Jaguar
Jaguar for Bass V1
The Zero-Hum Blues-Jag (Impersonator MV aka modern vintage) is a great pickup for the Bass VI, it is dynamic and responsive, and it has a slightly bolder sound.
We think a Texas Jalapeno v3 makes a great companion bridge pickup because it has a higher output level that helps balance the loudness of the bridge and neck. It also has more piano-mid-tones and slightly less treble that agrees with bass. Its sound is open and full of tone, and we believe you’ll love the experience.
Our ThickMaster (Jazzmaster) pickup is a perfect companion pickup for the bridge position of the Bass VI on the right above. It produces a very dark but responsive sound as far as single coils go. However, there are other choices in the Jazzmaster section, such as FatMaster and SurfMaster. Tell us which one you’d love to have in the Notes box on the Order Form.
News flash: We now include 2 of our specially made replica mounting screws.
Some people will call these noiseless Jaguar pickups, but Kinman prefers to describe them correctly as Zero-Hum Jaguar pickups. That’s because there are 2 types of noise, Hum which is canceled in the pickup and Buzz, which can only be minimized by shielding the wiring cavities (refer to >Technical >Perfect Guitar >Shielding for newer guitars
** Alnico-K is a unique proprietary rod magnet developed by Kinman in 1985. It is Alnico-5 but has 40% less string pull than Alnico-5, so sustain is longer, and there is much less clatter from string crash and no Strat-itis string warble.
* Fender, Strat, Jaguar, and Jag are registered Trade Marks of Fender Musical Instrument Corp, Inc. Kinman is not associated with FMIC, but they kindly permit us to refer to their Trade Marks to describe our products.
Technical Stuff
Kinman pickups for Jaguar are direct replacements, and no modification to the guitar is required.
Number of parts in this pickup: 31
Number of parts in regular single coil: 11
Number of parts in other brands noiseless: There are no other noiseless Jaguar pickups with Alnico rod magnets. Kinman is the only one, and that makes the Kinman the coolest Jaguar pickup available.
Connection means available
- Bare wires for soldering.
- Kinman connectors for plugging into any Kinman Goodbye-Soldering Harness. We do not make harnesses for Jaguar.
Hook-up cable
- Two conductors shielded is standard. Cut generously longer than necessary for the 2 stock Jaguar positions.
- Three conductors by request with Order.
- Custom lengths by request with Order.
Output Polarity:
- in-phase with Gibson and Copy humbuckers
- in-phase with all other Kinman pickups
- opposite phase to Fender Strat etc
Pot & Capacitor values
- Recommended with 250k Ohm Volume pot (measured), brighter with 500k or original Fender 1Meg for Volume & Tone.
- The tone pot is usually the same value as the volume. For a little more top end brightness can be 500k, 1meg or a No-Load.
- Normal tone cap value of 0.022μF in 63 ~ 100 volts. Smaller values lessen the severity of the Treble cut.
Magnet spreads (E-1st ~ E-6th)
- 51mm that suits Fender USA, Japanese, and Squire Jags.
Magnet Staggers
- Normal improved Stagger to suit 7 ~ 14 inch uniform radius fretboards including USA Custom Guitar Compound 7-1/4″ ~ 9-1/2
- Flat Stagger for specific compound radius fretboards (Warmoth 10 ~ 16 inch and Post 2010 Fender Deluxe 9 ~ 14″)
- Option to specify the magnet stagger in our ‘After-Order Additional Questions‘ email we send you.
Mounting hardware included
- Two of our specially made replica mounting screws.
- 2 Silicon Rubber tube springs are included.
- One one-piece non-magnetic Claw that is fixed to the pickup.
Covers
- Black and Cream for MiA and MiJ. With and without the Kinman logo.
We highly recommend consulting the Install Guide in the Technical section, even if you think you know it all. Kinmans require specialized knowledge, and sometimes there is updated info.
We also highly recommend consulting the Adjust & Set-up page also in the Technical section so you get the best out of your Kinman pickups.