Home/Bass Pickups/Bass VI Jazzmaster

$169.00

Out of stock

Bass VI Jazzmaster

Out of stock

Share

Description

Bass VI Jazzmaster

Bold Jazzmaster for Bass VI

Based on our ThickMaster for Jazzmasters this one has a thick, chocolatty growl that agrees with bass. Our Zero-Hum Jazzmaster pickups have risen to become the number one Go-To noise solutions for Jazzmaster and the same goes for these.

The thick, chocolatty growl imparts a desirable presence and the lively dynamics sound good for conventional bass sounds as well as modern virtuoso tap, slap and smack sounds.

** Alnico-K is a unique proprietary rod magnet developed by Kinman in 1985. It is Alnico-5 but has 40% less string pull than Alnico-5 so sustain is longer and there is much less clatter from string crash and no Strat-itis string warble.

* Fender and Stratocaster and Strat are registered Trade Marks of Fender Musical Instrument Corp, Inc. Kinman is not associated with FMIC but they kindly permit us to refer to their Trade Marks to describe our products.

Technical Stuff

Kinman pickups for Jazzmaster are direct replacements and no modification to the guitar is required.

Laser engraved identity nomenclature so you’ll never forget.

Number of parts in this pickup: 28
Number of parts in regular single coil: 11
Number of parts in other brand noiseless: There are no other noiseless Jazzmaster pickups with Alnico rod magnets. Kinman is the only one and that makes it the coolest Jazzmaster pickup available.

Cavity depth

  • 12mm (1/2″) standard cavity depth, plenty of height adjustment.

Connection means available

  • Single wires for soldering.
  • also available with Kinman connectors for plugging into a Kinman Strat, Tele or KHP-90 Goodbye-Soldering Harness.
    • We can make harness for some Jazzmasters upon request.

Hook-up cable

  • 3 single hook-up wires, color coded and facilitate phase reversing.
  • Cut generously longer than necessary for the 2 stock Jazzmaster positions. neck 37cm & 32cm bridge.
  • Custom lengths by request with Order.

Output Polarity:

  • in-phase with Gibson and Copy humbuckers.
  • in-phase with all other Kinman pickups.
  • opposite phase to Fender.
    • Can be phase reversed to match that of Fender pickups.

Pot & Capacitor values

  • 500k Ohm or original Fender 1 Meg for Volume & Tone is recommended. 250k volume pot compromises the dynamic feel to an extent.
  • Tone pot is usually the same value as the volume pot.
  • Normal tone cap value of 0.022uF / 63 ~ 100 volt. Smaller value lessen the severity of Treble cut and requires some experimentation.

Magnet spreads

  • 52mm, 50mm & 47.5mm depending on type of bridge.
    • Narrow versions incorporate our unique Coil Spread Compensation Technology (CSCT)

Magnet Staggers

  • Normal improved Stagger to suit 7 ~ 14 inch uniform radius fretboards including USA Custom Guitar Compound 7-1/4″ ~ 9-1/2
  • Flat Stagger for specific compound radius fretboards (eg Warmoth 10 ~ 16 inch compound and Fender Deluxe Compound Radius)
  • Option to indicate your fretboard radius is in our ‘After-Payment Additional Questions‘ email we send you.

Mounting hardware included

  • We now include our own specially made mounting screws.
  • 4 Silicon Rubber tube springs are included.

Covers

  • Available in White, Parchment & Black.
  • With and without Kinman logo.
  • Original Fender covers are suitable only for 52mm magnet spread, NOT for our 50mm and 47.5mm neck magnet spreads.
  • Aged White and Cream covers without magnet holes are available on eBay.

We highly recommend consulting the Install Guide in Tech Info even if you think you know it all. Kinmans’ require specialized knowledge and sometimes there is updated info.

We also highly recommend consulting the Adjust & Set-up page in the Technical section so you get the best out of your Kinman pickups.

Related Products

Title

Go to Top